wuxi USU bearing co.,ltd

Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]

linear bearing
Specification: LM/LMF/LMK..
Detail: The linear bearing LM type is used in combination with a cylindrical optical axis which can complete a linear motion system of infinite linear motion. The load-bearing steel ball is in point contact with the cylindrical optica...

pillow block bearing
Specification: ucp201-220
Detail: The bearing with seat is hereinafter referred to as (bearing assembly). The outer spherical bearing is a deep groove ball structure with a sealed and greased bearing. It has a variety of bearing seats and a combined assembly p...

spherical roller bearing
Specification: 22210
Detail: The bearings with drum shaped rollers are installed between the inner ring with two raceways and the outer rings with spherical raceways. The curvature center of the raceway surface of the outer ring is the same as the bearing...

deep groove ball bearing
Specification: 6002
Detail: Single-row deep groove ball bearings are suitable for high-speed and even extremely high-speed operation, and are very durable without frequent maintenance. This kind of bearing has a small friction coefficient, high limiting ...

aligning ball bearing
Specification: 12/13/22/23...
Detail: The aligning ball bearings are mainly used to bear radial loads. While bearing radial loads, they can also bear a small amount of axial loads, but generally cannot bear pure axial loads. Their limiting speed is lower than that...

spherical roller bearing
Specification: 222/223/213/230/232/238...
Detail: The bearings with drum shaped rollers are installed between the inner ring with two raceways and the outer rings with spherical raceways. The curvature center of the raceway surface of the outer ring is the same as the bearing...

thrust ball bearing
Specification: 511/512/513/514..
Detail: Thrust ball bearings are composed of shaft ring, seat ring, ball and cage,which belong to separable bearing. The thrust ball bearings are divided into two types, flat and aligning spherical types, and can bear loads in both di...

tapered roller bearing
Specification: 302/303/320/330/329/322/323/332/331..
Detail: Tapered roller bearings are separate bearings. Both the inner and outer rings of the bearing have tapered raceways. This kind of bearing can be divided into single row, double row and four-row tapered roller bearings according...

cylindrical roller bearing
Specification: 12/13/22/23...
Detail: Cylindrical roller bearings, the rolling elements are centripetal rolling bearings of cylindrical rollers. Cylindrical rollers and raceways are linear contact bearings.Large load capacity, mainly bearing radial load. The frict...

deep groove ball bearing
Specification: 60/62/63/68/69..
Detail: operation, and are very durable without frequent maintenance. This kind of bearing has a small friction coefficient, high limiting speed, and a wide range of sizes and forms. It is used in precision instruments, low-noise moto...


Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]
1